2010-2012
Ford Fusion DIY Remote Start System

“Take the fastest route to DIY remote starter installation on your Ford Fusion with a remote start kit from MotorCityAutobahn.com. Eliminate the need to make any stops for vehicle-specific computer programming, installation manual downloads, or sorting through plugs and harnesses intended for other Ford models before installation. With a true vehicle-specific kit there are no detours, just a direct route from delivery to your Fusion following our step-by-step installation guide we mapped out for you.”

 

► 2010-2012 Ford Fusion Remote Start Features

• Dual-Activation Capability
  This system is activated using your existing Ford keyless entry remotes and optional Fortin long-range remotes (offered during checkout).
• Automatic Heat/Defrost/AC Activation
  Just leave your climate controls on where you need them when parking your vehicle, and the system will automatically turn them on shortly after you activate the remote starter system.
• Choice of with or without Horn Beep Confirmation
  Choose whether to hear the horn beep when you activate the remote start or just silently flash the parking lights. Your choice is included and provided during checkout.
• Choice of Remote Start Run Time
  15-Minute Remote Start Run Time (standard). Need more or less remote start run time? No problem. Your choice of a shorter or longer run time is an included option provided during checkout.
• Active Keyless Entry
  You won't lose your ability to remotely unlock the vehicle's doors while it's running by the remote starter, so you won't have to use the key to get into the vehicle.
• Remote Start Cancel
  You can shut down the remote starter sooner the same way you activated it.
• Active Key Takeover
  The remote starter stays running when the driver's door is opened, so you won't have to manually restart your vehicle with the key every time after you remote start it.
• Fortin RFK-411 Long-Range Remotes Upgradeable
  Go the distance with a set of Fortin long-range remote transmitters and have the remote power to start your vehicle when you're standing in the checkout line or when it's parked around the corner. The remote upgrade can also be added on and purchased later after installation if you find the need for the extra range in the future.

► Safe & Secure Remote Start Operation

• Brake Pedal Monitoring for Security
  If the brake pedal is stepped on before the ignition is turned on with the key, the remote starter will immediately shut down.
   
• OEM Open Hood-Pin Monitoring for Safety
  The system cannot be activated when the vehicle's hood is open and will immediately shut down if the hood is opened while the vehicle is running by the remote starter. The vehicle must be equipped with an OEM hood pin switch for this safety feature to be provided (not required for remote start operation).
   
• SAE-Certified Components
  OEM-grade components that meet or exceed all OEM safety standards equivalent to Ford part number DA8Z-19G364-A.

► 2010-2012 Ford Fusion Remote Start DIY Installation Overview

• No Computer Programming Required
  No vehicle-specific computer programming or manual downloads. Just go straight from delivery to your vehicle for installation.
   
• In-Vehicle 2 Keys System-to-Vehicle Programming:
  ► Required: 2 Ford OEM keys or aftermarket OEM-equivalent replacement keys are required for in-vehicle, system-to-vehicle programming. Over-the-counter cloned key replacements will not work. You must have 2 keys to the vehicle that have been separately programmed to the vehicle's anti-theft system (a.k.a. the Ford's PATS system). This is a universal requirement when installing any aftermarket remote start system into these vehicles.
  
  TECH TIP: If you are not sure about your vehicle's current key situation, click on the "?" below, and a technician will provide you with the information you need to perform a quick test in your vehicle to confirm you have the required keys before making a purchase.

• Plug-In T-Harness Installation
  3 plugs to vehicle T-harness Installation: 2 plug-in connections at the vehicle's ignition cylinder assembly on the steering column and 1 at the vehicle's OBD2 port.
   
• No OBD2 Port Blocking
  You won't lose normal access to your vehicle's OBD2 port. No unplugging the remote start system every time the vehicle's OBD2 port is needed for vehicle service or additional accessories.
   
• No Computer Programming Involved
  No additional component is included or required for vehicle-specific computer programming or manual downloads. Just go straight from delivery to your vehicle for installation.
   
• Step-by-Step Installation Manual
  Step-by-step installation manuals that will guide you through the entire installation without any guesswork.
   
• View/Download
  Adobe PDF 2010-2012 Ford Fusion remote start "System-to-Vehicle" 2-key programming procedure.

► Fortin™ Long-Range Remotes Upgradeable

• Looking for more range than what your factory remotes provide?
  Using just your factory remotes, the system will only work from as far away as you can currently lock and unlock your vehicle now. Boost this system to work from up to 2000' away with a set of Fortin RFK-411 long-range remote upgrade kits and have the remote power to start your vehicle when you're standing in the checkout line or when it's parked around the corner.
   
• Easily Upgrade this System Any Time
  The upgrade is offered during checkout now, but the remote upgrade can also be added on and purchased later after installation if you find the need for the extra range in the future.
   
• The Remote Upgrade Kit Includes
  2 x Fortin RFK411 1-button remote transmitters (as pictured), an extended-range plug-in antenna, and a cable. Just one additional plug to the system harness is required; no hardwiring is involved.
   
• Quality Assurance
  OEM-grade components. Meets or exceeds features equivalent to Ford OEM part numbers DL3Z-15603-C and DS7Z-15K601-F.

► 45-Day QC Performance Guarantee

• 100% Money-Back QC Guarantee
  If within 45 days from the date of delivery you're not totally satisfied with the quality received on delivery or performance after installation, just put everything back into the system's *original box, send us an email, or give us a call, and one of our technicians will email you a prepaid return shipping label at no cost to you. You will receive a 100% full refund with no shipping deductions or restocking fees.
   
• *We ship all our remote starter systems in resealable boxes; please save the original box to retain your 45-day free return entitlement.

► Lifetime Warranty

• The Industry's Best Warranty Coverage
  Providing the highest quality components in the industry means you can provide the best warranty coverage; though it's highly unlikely you would ever need warranty service for a Fortin™ system, in the rare event once one of our techs confirms a component failure, we will email you a prepaid return shipping label for the part we are replacing at no expense to you; all replacement costs are covered under your warranty for the lifetime of the vehicle in which the system was originally installed. Limitations and exclusions apply; non-transferable.
   
• Once our auto-tracking system confirms your shipment, we will send you out your replacement while your return is still in transit. No waiting several weeks for a warranty exchange.

► 7 Days a Week Sales & Support

• In the middle of the install and have a question?
  Have a question before, during, or after installation? No problem. We have Ford remote start specialists on call 7 days a week (ET). Through our national 800 number, by email, through our online live tech chat, and through our YouTube channel. Reply times average from immediate to 30 minutes. We also have an after-hours callback request messaging service for next-day callbacks from one of our technicians.

2010-2012 Ford Fusion Remote Starter Kits

"Built by Installers for the DIY Installer"

Electronic components manufactured by Fortin™ Automotive Electronics of Canada. All systems are designed, assembled, vehicle-specific CAD programmed, and QC bench-tested with T-harnesses made and shipped out of our facility in Michigan.